
Eco Smart Oil Maker Machine
Description
Technical Parameters
Ecological intelligent oil machine
When the equipment is used, the heat generated by friction meets the heat necessary for the operation of the oil pressing process, which helps to promote the thermal denaturation of the protein in the embryo, destroys the colloid, increases the plasticity, and also reduces the viscosity of some easy to precipitate oil, thus improving the oil yield of the oil pressing machine, so that the oil in the material is pressed out, and flows from the garden row gap and strip row gap.
Ecological intelligent oil machine press the basic process of oil extraction: In the ecological intelligent oil machine, the oil extraction process can be divided into three stages, namely, the feed (pre-pressure) section, the main press section (oil extraction), and the cake section (heavy oil leaching section).
1. Feed section: The press begins to be squeezed tight in the feed section, discharge air and a small amount of water, plastic deformation occurs to form a "muffin", and begin to produce oil. The high oil content starts to produce oil at the feed compression stage. It should be noted that back pressure is easy to occur in the feed section, and measures of forced feeding and pre-pressing should be taken to overcome "back feed".
2. Main press section: This stage is the stage of high pressure mass oil discharge. At this time, due to the rapid and regular reduction of the space volume of the press chamber, the press material is strongly squeezed, the material begins to combine, the press material becomes a continuous porous material in the press chamber and is no longer loose, and a large amount of grease is discharged. At the same time, the press material will also cause the material layer velocity difference displacement, fracture, mixing and other phenomena due to the screw break, the squeezing force of the press chamber and the shear action of the press cage Angle, so that the oil circuit continues to open. It helps to drain oil quickly.
|
OIL PRESS MODEL NUMBER |
6YL-70 |
HEATING POWER (KW) |
1.8 |
|
DIAPHRAGM DIAMETER (MM) |
65 |
HANDLING CAPACITY (KG/H) |
50-80 |
|
PRESSING SCREW (R/MIN) |
48 |
OVERALL WEIGHT (KG) |
280 |
|
MAIN ENGINE (KW) |
3 |
EXTERIOR SIZE (MM) |
1400X860X1260 |
|
vacuum pump (KW) |
0.75 |
VOLTAGE (V) |
220V |






Hot Tags: eco smart oil maker machine, China eco smart oil maker machine manufacturers, multi functional oil press, pumpkin seed oil press, oil press for fish oils, oil extraction press, hot press oil press, hemp seed oil press
Previous
Hot Oil Press MachineSend Inquiry






